did you put thermal paste on the cpu before mounting the heatsink?

also when removing the old one get the paste remover solution thats what i do before applying new paste to my p4 3.6ghz when it needs reapplying again

Whats wrong with suggesting he re applied thermal paste

sure i did..but even on bios it tells 61c ,i had change original heatsink but i got nothing,may it coz my mb's bios..i use abit lg-9c bios ver 12, i found on inet thers 14 ver..but worry about flashing it, i already had its file on harddive..

when i use ori heatsink it fan speed reach 4700 rpm,i use cpuid hw monitor

thermal throttling happens after 95c.

65 degrees loaded for a pentium 4 is not all that high, especially if you have a fairly warm environment. If it is the stock heatsink then you probably couldn't hope for much better performance unless you have a couple case fans perhaps?

It is unlikely that those temperatures are leading to system instability

i had open case 2 sides..yesterdey i checked bios on pc of m office, n it only 38c its p e5300..in same environment..

Don't compre with a low end, low voltage Core 2. They are incredibly cool processors, whereas Pentium4's especially the later models as you have are particularly hot....

change cpu, its mean reinstalling windows,reactivate it,reinstalling all program..i hate to do that..

i m barack obama and im ordering you to stfu

you're just a clown

ps learn to spell

whats ur opinion if i change my p4 2.8 cpu with pentium d, 2.66..coz i had it but don use it cos it take more time on booting os..

p4s at 80 are okay in summers t

but it restarting u know

bsods?

university of california giving out hacker degrees now are they