@ezhide | ||
Can i flash a cid51 phone with a cid52 firmware??? My phone is k800i r1jc002 cid51 help guys |
||
14
Replies
2097
Views
0 Favourites
|
Page #: 1/2 |
@diezi1 | 7 February 10 | |
Yes but its not simple, first you must have quick access patch applied (use den_po's anycid method to patch QAPatch) then you must convert both FW files to .raw, then flash with either SETool2 Lite or jdflasher (XS cannot do it) and manually enter the firmware start/length addresses, but be warned, if done wrong you can kill the phone beyond repair, I wrote a guide about flashing cid52 with cid53 FW over at se-nse, the principle is the same once you can enter the flash area in jdflasher
|
||
@diezi1 | 7 February 10 | |
but why not flash with cid51 FW and XS++, its easier and a lot safer, try seusers.com for FW, its free to download once you sign up =)
|
||
@suresh86 | 7 February 10 | |
I didnt know cid update was that complicated. Ezhide you better go to r8bf003 cid52.
|
||
@ezhide | 7 February 10 | |
@suresh i ve try to upgrade the cid to 52 cant do it. Xs++ say its done but stil 51 setool also says done stil 51
|
||
@ezhide | 7 February 10 | |
I took it to a repair shop he said he has to do a testpoint, any body knows this method??? I dont want to kill my phone guys
|
||
@diezi1 | 9 February 10 | |
@suresh86 thats for flashing different cid fw not updating cid =), @ezhide if it needs test point your best off letting the shop do it, they'll have the proper cables etc...
|
||
@ezhide | 9 February 10 | |
@diezil are u say that it can be done via test point?????Thanks mate ill take it to the repair shop.
|
||
@diezi1 | 9 February 10 | |
If the repair shop says it can then I a55 ume so =)
|
||
@ezhide | 10 February 10 | |
Okay let me try them
|
||
@ezhide | 15 February 10 | |
Am from the repair shop the guy said its done. Off to check it my self!!!
|
||