You are not logged in to Prodigits. Please
|
@g0l1ath1 | |
|
On my quad i want more torque, how shud i change the rear sprocket, atm it has 14tooth front and 40tooth on the back, quad has gud top end, but getting there is slugish, the wheels are biger then what they shud be. |
||
|
7
Replies
1000
Views
0 Favourites
|
||
|
@rsi.xav | 12 July 10 |
|
Go fo bigger sprocket.. 43 or 45tooth. Hope d chainlength nd tensioner wil allow u..
|
||
|
@motoguyx | 13 July 10 |
|
You need smaller front sprocker or larger rear for better acceleration, which is what you are lacking?
|
||
|
|
@g0l1ath1 | 13 July 10 |
|
I lack pull off, it pulls the motor dead then it starts going as i get higher in the rpm
|
||
|
@mancmike | 15 July 10 |
|
the gearing is messed up cause you got bigger wheels, id put smaller ones on and it will be fine
|
||
|
@424 | 15 July 10 |
|
i have a cbr 600 rr and wanted more pull,so i went 2 up at the back,and 1 down in front!i made a huge differance!
|
||
|
|
@motoguyx | 16 July 10 |
|
Maybe you have sumit wrong with carbs or injection.
|
||
|
@anubus29 | 19 July 10 |
|
dude don't mess with the motor and box if it starts fine and runs to a good top end. Take 424's advice and change your front and rear sprocket and do the chain as well or you will shorten the life of your new sprockets. Have fun
|
||
