You are not logged in to Prodigits. Please 
Blackberry > Topics
|
@pielle | |
|
Apps you need. First a pc. MML MULTILOADER 2.13. The RIM LOADER. The boot and restore files. The boot is called MFI. The restore files you can find after installing your device software. Its under common Rim shard gprs.. And you need your device software of course. And you need the Radiolab tool. Any questions. I will explain after i get questions to make it simple |
||
|
8
Replies
12163
Views
0 Bookmarks
|
||
|
|
@pielle | 3 October 09 |
|
- Have already installed and working Multiflash Loader (MML.exe) v2.0.1.3 o or above. - Radio Lab Tool (This is for imxx repair) - Device Firmware flash, must be exactly same version |
||
|
|
@pielle | 3 October 09 |
|
01 - Disconnect your PC from your Internet connection. 02 - Go to the MFI Multiloader instalation folder: C:MML 03 - Go to folder HHFiles, run the .bat file wich match your device model. 04 - Connect the USB cable to your BB device and power on. 05 - After finish this procedure phone will show on screen No Application Linked (Factory 05) 06 - Disconnect device and start MFI Multiloader (MML.exe) 07 - Press the keys CTRL + SHIFT + ALT + F12 (together) so you can see the hidden menu. 08 - Uncheck option Auto start if it is checked. 09 - Connect the USB cable to your BB device. 10 - Click on b*tton Clear MEP 11 - Close MFI Multiloader, here you've it unlocked, just have to restore it |
||
|
|
@pielle | 3 October 09 |
|
* Following Steps are for IMXX repair, if just unlock then go to step 18 * 12 - Start Radio Lab Tool. 13 - Connect BB device to USB press first b*tton on left to connect. 14 - Go to the ID section, click on b*tton Read to read IMEI and BBPIN. 15 - Modify them. 16 - Press Write for each one. 17 - Disconnect and close Radio Lab Tool. 18 - Go to folder C:Program filesCommon FilesResearch In MotionSharedLoader Files |
||
|
|
@pielle | 3 October 09 |
|
19 - Go to folder wich match your device model and firmware version 20 - Now got to the GPRS folder y and copy to clipboard the .SFI you see there. 21 - Get back to the folder C:MMLHHFiles and paste there the .SFI you have on clipboard. 22 - Creaate a .bat file, you can choose any name, I use model firmware and version as name. 23 - Write this code inside the .bat file: |
||
|
|
@pielle | 3 October 09 |
|
Code: :START loader -u load rimx x xx.sfi pause GOTO exit |
||
|
|
@pielle | 3 October 09 |
|
24 - Replace the rimx x xx.sfi to match your .SFI file 25 - Run the .bat file and connect your BB Device. 26 - After finish this process BB device should start normally. |
||
|
|
@pielle | 3 October 09 |
|
here is the sfi pack download http://www.uniksupport.com/Furious_B...s/SFI_Pack.rar |
||
|
|
@pielle | 3 October 09 |
|
At folder C:MMLHHFiles you've loader.exe file, you've to copy your .SFI file, that matches your model and software version from C:Program filesCommon FilesResearch In MotionSharedLoader Filesmodel-fw_versionGPRS where your loader.exe file is, then create the .bat file with the command ' loader -u load your_SFI_file.sfi ' The .SFI file you get it after you install firmware. Regards.- |
||
Blackberry Forum
Bookmarks
Blackberry
