Q1. What is format ffs?
It is the arrangement of data To comply with the phone.
After format ffs phone gets it's default state,all the user data gets delete and bug/viruses are removed.

Q2. What are different types of flashes?
A.NOR, PSRAM and NAND

Q3. How many different CPU's are there in China phones ?
A.different CPUs and flash types (MTK , SPD Spreadtrum, TI Texas Instrument, Skyworks, AD an*log Device, Infineon)


Q4. Can we list Cpu types?
A.
CPU type
6205
6217
6218
6219
6226
6227
6228
6229
6225
6223
6230....

More types

6600D
6600M
6600E6600I
6600H
6600R
6800..... etc.

Q5. What is NAND and NOR?

i)NOR:.Intel introduced the first commercial NOR type flash chip in 1988.NOR-based flash has long erase and write times, but provides full address and data buses, allowing random access to any memory location.

ii)NAND:.NAND is the 2nd type of flash . It has faster erase and write times, and requires a smaller chip area per cell .Tt also has up to ten times the endurance of NOR flash. However, the I/O interface of NAND flash does not provide a random-access external address bus. Rather, data must be read on a block-wise basis, with typical block sizes of hundreds to thousands of bits.

Q6. What is PSRAM?
A.Pseudo-Static Random Access Memory

Q7. What are different pinouts of china phone
A.Pinouts:.
RX
tX
gnd
D+
D-
vpp
Power on

Q8. my phone is getting power on with battery but not with Power supply?
A.Use 4.2 in power supply it will power on.Normally china phones need more than 1100 mA current to power on that's why they need 4.2 V.

Q9. Using china tool boot loader lines run and then stops but phone fails to power on?
A.HW fault check where the power line is broken/cut.Make jumper.

Q10. What is jumper?
A. short lenght of wire used temporarily to complete a circuit or to bypass a break in a ciruit.